Theses Supervision

  • Seyyed Hossein Mousavizadeh: Synthesis of properties of zirconium carbide nanoparticles by sol gel method, 2018
  • Isa Ahmadi Rad: Synthesis Reviewing the Properties of TiB2 Nanoparticles by Sol Gel Method, 2018
  • Mostafa Barzaghi Khaneghah: Effect of adding different amounts of colloidal silica on mechanical properties and structure, 2018
  • Mohammad Aghasy: The effect of temperature and time on the W-Fe-Ni composite using a fast hot press, 2017
  • Morteza Rasouli: Investigating the effect of fused silica particles on mechanical properties and microstructure of zircon-mullite ceramic molds for use in the investment casting industry of hot-gas turbine parts, 2017
  • Saeid Hamnabard: Investigation of the HIC Corrosion Effect on Carbon Steel, 2017
  • Amir-pour sahebgharan: Synthesis of colloidal silver nanoparticles solution from waste circuits and electronic boards, 2017
  • Amirreza Balichalandar: Construction of Aluminum Nanocomposite reinforced with Carbon Multiwall Nanotubes by Mechanical Alloys, 2016
  • Behnam Khalili: Modeling the effect of mold length, diameter, and angle of channel on stress distribution and comparison of optimal modeling, 2016
  • Maryam Ghamginpour: Synthesis and Study of the Properties of the Nanometer Powder of Silicon Oxide by Sol-Gel Method Using Boric Acid and Sucrose, 2016
  • Abdollah Nasiri: Recycling of Polyamide Composites - Glass Fiber and Investigating the Properties of Tensile Strength and Impact Resistance for Use in the Radiator Industry, 2016
  • Hossein Islami Nasab: Effect of Graphene on Mechanical Properties of Aluminum Nano-Composite - Graphene Produced by Cumulative Rolling, 2015
  • Kourosh Nematipour: Synthesis of Fe Co magnetic nanoparticles in different alloy ratios by microemulsion and investigating magnetic properties, 2015
  • Seyed Nima Tabatabai Tabrizi: Construction and identification of dental composite based on acrylate monomer and silica nanoparticles as filler phase with the aim of reducing contraction after fixation, 2015
  • Seyed Shayan Vallaei: Synthesis and Investigation of the Properties of the nanopowder of Silicon Oxide by the Sol-Gel Method, 2015
  • Mostafa Izmadam: Evaluation of the homogeneity of aluminum 6063 alloy billet in homogenizing furnaces and determining optimal conditions, 2015
  • Akram Torabi: Effect of different amounts of CaF2 on the hardness, density and chemical properties of dental ceramics of hydroxyapatite-zirconia, 2015
  • Fahimeh Sharifi: Synthesis and Investigation of the Properties of Titanium Carbide Nanometer Powder by Sol-Gel Method, 2013
  • Abdolmajid Qnatabadi: Study of mechanical and thermal properties of polyacetylene-clay nanocomposite for use in gas industry, 2013
  • Mahyar Kheradmand: Study of compressive strength and tensile strength of geopolymer composites containing polymer waste fibers, 2013
  • Alireza Soleymani: Investigation of compressive strength of geopolymers containing plain carbon fiber exposed to chlorine and sulfate ions, 2013
  • Ali Soloki: Effect of different amounts of MgCO3 particles on the density and size of aluminum foam cavities prepared by powder metallurgy, 2013
  • Hamid Zohrehvand: Investigating the effect of aging thermal treatment on mechanical properties of aluminum foam metal, 2013
  • Ali Majdi: Investigation of compressive strength and thermal shock resistance of geopolymer foams created by mixing mortar with sawdust particles and burning it, 2013
  • Abbas Saberi: Investigation of the effect of nickel on the structure and magnetic properties of cobalt- iron alloy (Fe70-Co30) with nano structure prepared by mechanical alloying, 2013
  • Mahdi Sadeghian: Creation of nanopowders of chromium siliside and (Cr, Si (Al2O3))  in situ nanocpmposite with Cr, Si, Al powder using mechanical alloys and its identification, 2013
  • Morteza Khalesi: The effect of roasting and deposition process control and optimization of production of Ferro vanadium from secondary sources for use in alloy steels, 2012
  • Hamed Bahmanpoor: Synthesis and investigation of the properties of titanium oxide nanometric powder by sol-gel method, 2012
  • Hamidreza Mohebbi: Investigation of Factors Affecting Ni-SiC Coating on Copper Based Using Electroplating with Discontinuous Flow and Comparison with Direct Current, 2012
  • Alireza Bahraminia: Creation of nanometric titanium dioxide coating on glass substrate by PVD method and its properties, 2012
  • Ebrahim Moradi: Investigating the Possibility of Determining the NaF / AlF3 Ratio in an Electrolytic Bath by Analyzing Elemental Melting Metal of the Aluminum Reducing Cell and Modeling it, 2012
  • Nasereaddin Alizadeh: Fatigue behavior of nano-titanium foam containing hydroxyapatite coating created by thermal spray method

Current M.Sc. Project

  • Hosseinzadeh: Controlled synthesis of nanocomposite WC / Co by chemical treatment in water system and investigation of hardness and wear properties of final product for application in shear tools
  • Orami: Construction and examination of epoxy resin coatings containing magnesium hydroxide nanoparticles in order to access the waterproof and anti-sticking properties on the surface of ceramic tiles.
  • Hosseinzadeh: Exogenous studies and evaluation of mechanical properties of biodegradable nanocomposites based on polycaprolactone and bioactive glass and its feasibility for bone tissue regeneration
  • Shojaei: An investigation of the mechanism of the effect of sintering on the thermomechanical properties of the thermal barrier coatings of the zirconia base and the nanoscale plasma coating
  • Sharifi: Synthesis and investigation of ZrO2 nanometric powder properties by sol-gel method using alkoxide agent in alcoholic bed
  • Rahimi: Effect of slag compound on iron refining in copper-zinc alloy by pyrometallurgy method
  • Shiri: Investigation of Effect of Al2O3 and SiO2 nanometric particles and their mixture on mechanical properties of kaolin base composite
  • Ghazi-Mirsaeed: Producing of vanadium Carbonitride Coating on AISI L2 steel by thermoreactive deposition and diffusion Method and evaluation its structure, hardness and wear resistance
  • Fakhimi: Synthesis of porous aluminum oxide nanoparticles using aluminum scrap for use as a catalyst substrate
  • Masoumi: Effect of applying zirconia coating with different percentages on thermal properties and corrosion of alumina refractory bricks used in cracking furnaces of petrochemical industry